I got some new rims for the 300, i got the Rays Engineering rims from the nissan 350z Track V.2 19x10" +30 and 18x9" +30. Ill take some pics this weekend when i can guys
Guys i got pics of the wheels on the R34 though http://www.skylinesaustralia.com/forums/msg-a195891- rear looks perfect minus a few scratches top right corner http://www.skylinesaustralia.com/forums/msg-a195894- other rear again minor scratches http://www.skylinesaustralia.com/forums/msg-a195892- front few scratches top left http://www.skylinesaustralia.com/forums/msg-a195893- other front again a scratch in the top left There are a few scratches which im sure i can get repaired my question is how much am i looking at and where is a good place in sydney i can go to??
Hi Scott, I don't want to highjack this thread, but I live northside. I've been to one of the tech days in the ACT but that was a little while ago now. My wife broke her ankle so I've been reduced to driving her to work in her Yaris. Here's the car if you ever see me out.
Question, have you actually fitted these to your Z32 yet? If so, please let us know what rubber you are running on front and back. Also, how much you had to roll the rear guards to get a 19x10"+30 offset to fit
you would need to roll and do a fender pull and run decent camber for the car to be dumped with that size,a stretched tyre may help you get away with less camber
Yep, my point exactly Simon. I really can't imagine this size/offset will fit on a Zed even with rolled guards. I'd say it would have to be pumped to squeeze those puppies in there. .... This is why i'd lurve to see some piccies actually on Zedboys Zed.
exactly right Benny,alot of the guys run crazy offsets and sizes in the U.S,but it requires a great deal of work to get it right
No i haven't pickin them up this weekend, they are currently on an R34 GTR the rear have a 245/35/19 peeled over them and the front are also 245. This was done to try keep the widths the same as the GTR is AWD though it has done some damage to his transfere case. The car is currently at stock height, will be gettin the guards rolled next weekend. These wheels originally came out with 265/35/19 on the rear so ill be goin either 265/35/19 or 275/30/19
CLICK on the links, i dont know how to post pics up yet, someone please educate me on how to do it as i hate it when i have to click through links n photodump n all that so i dont really want to make any of you guys have to do it.
Sorry again for not postin pics properly in bit of a rush right now, if you have a look at this thread you will see several pics of a zed with Track V.2 wheels on it. http://www.aus300zx.com/forum/showthread.php?t=280117&highlight=350z+wheels Post is by "lidz" check it out, the offset really sets the car off, excuse the pun lol
Zedboy, please keep everyone updated on your progres with this. I can't wait to see the final look and hear about what was involved with the install.
zedboy the guy that owns the zed with the v.2 wheels on it is 'ben@zcreations' on twinturbo.net so maybe ask him what was involved in fitting them up
Don't worry i will, pickin them up tommorow but i still have to buy rubber for the rear and roll the guards so should all be done soon, i think its goin look a bit silly at first as my car is still stock ride height and not lowered
