Endless CC-X Ceramic Carbon Metalic pads, :zlove: Full Set (front and rear) less than 1mm wear, Fronts 13.8mm (14.5 std) Rears 15.3mm (16 Std) EP-230, EP-231 $300 inc post! cheers, Mike here's the speal: The CC-X is a ceramic-carbon-metallic compound, which is developed for fast road cars to be used at high speed driving with repeated braking and acceleration. It is suited for use in a power brake system with or without ABS. The CC-X is a high heat resistance compound which can also be used for circuit racing, like a sports car club race day. There is no need to change pads for such an event. The initial bite and response is excellent even at high speed like 250 ? 300km/h and also the pedal feel and brake balance. The CC-X is also developed to go together with mass produced standard rotors with a lower steel quality and still not wear the rotors down or cause problems with heat cracks even at high temperatures. The wear of the pad is also exceptionally low, which makes for a good economical aspect. It has, just like the race compounds, a high degree of anti water fade even if cross drilled or grooved rotors are not used. The CC-X is also developed to be used in cold weather conditions. The pad response is still good in these instances. Depending on caliper construction, rotor materials etc, it can sometimes happen that noise can appear at low temperatures and low speeds, but this is normally not a big problem to sort out. Technical data: Heat range 100 ? 700 oC Friction value 0.35 ? 0.45
