Washer jets aren't working right.

Hey guys, got a small problem with my windshield washers, namely, that only the right one works, and it works kind of weakly, like there's not much pressure.

Any ideas?

Cheers,

-Kirill

 

Nozzles are blocked, get a very small needle and clear out the holes. Pull the line off from the other side of the bonnet and flush water through the nozzles.

 

^ as above, i did this the other day kirill.

a tiny hair pin in the nozzle holes, and spray and it should come out.
done

 

Just go to repco and buy a new pair ,around $ 10 for the pair and they work sweet.

 

hi ok i had the same problem but if you replace the one way valves they should work fine i had two valves inline of the washer hoses but only replace them with one and put a straight tube where the other one was and they work great.

 

It is more often the nozzles than the check valves. And the check valves are only on the 2 seater zeds