hey guys, I still havent been able to figure out this suspension and I was wondering if anyone can help me before the long weekend! I mistakenly removed 3 allan screws from the top of the camber plate of the suspension. As you can see in the picture. But when I tried to put the allan screws back in the drop down without threading. The screw is not damaged. I think that something had moved inside which would normally thread the screw except I cannot see it. When I remove the wheel and look underneath the car I cant see where the allan screws come through as the spring goes all the way to the top! This is the tricky part! When I put the screws in and they drop down I noticed when I turn the big hex nut in the middle clockwise that 2 of the allan screws tighten but 1 remains lose. When I turn the big nut anticlockwise, the other 2 allan screws tighten but another one comes lose! So I can only ever get 2 screws to tighten. Can someone please assist! I know there has to be someone on this forum with an adjustable hight and damper suspension or HKS Hypermax and Damper. Any advice will be appreciated. Thanks and Happy Easter! :bash:http://darrylperera.gallery.netspace.net.au/album02/DSC02579