QLD TT 2+2 manual, lots of mods.

Discussion in 'Whole Cars for Sale or Wanted' started by kawasakirider, Feb 21, 2013.

Thread Status:
Not open for further replies.
  1. kawasakirider

    kawasakirider New Member

    Something has come up and I'm putting my car up for sale, if it's not sold in time I'll keep it.

    Engine is healthy at 155-160 PSI across all cyls, tests welcome.

    Car has just had an engine put in it by Eric with a 100k service.

    Since I've owned it I've put iridium plugs in it, an FMIC, a haltech boost solenoid so the boost is controlled through the ECU, a new urethan UCA bush (all other bushes are new urethane items), the engine, the tune, all sorts of stuff. A RWC can be arranged with the sale.

    I can even chuck in the Desmond Wise Sports that I just bought.

    Plenum pull has been done and I recently bypassed the hard line on the bastard hose.


    Ok, mod list:

    FMIC
    Haltech boost solenoid
    42mm radiator
    Adjustable fuel pressure reg
    040 fuel pump
    Haltech EllV2 ecu
    New engine mounts
    2 1/2" twin exhaust out of dumps into single 3" exhaust from cat back to a 5" cannon
    UAS braided clutch line
    Air con has been removed, along with a lot of other non used items that have been suggested for removal to decrease the weight of the car

    Full tein suspension, height adjustable coilovers, all bushes, tension rods
    HICAS elimination bar
    Rear subframe bushes
    Adjustable camber bolts
    Single piece tailshaft from driveline services
    4 brand new 235/35/19 tyres, space saver in the boot and also a spare 245/35/19 rubber only

    Alpine 7" touch screen dvd/cd player
    Alpine 6 1/2 tyre r front speakers
    Infinity 4x6 rear speakers
    Sony 500w 4 channel amp
    HKS turbo timer
    Garrett boost gauge and speco water temp gauge, spare slot for a 3rd gauge of choice
    Optima red top dry cell battery relocated to the boot in a battery box

    Car was tuned at Millennium Motorsports on a mainline dyno which reads lower than other dynos. The car made 213rwkw on 13 PSI on stock turbos and injectors. All supporting mods here for a nice amount of power, just add turbos, dumps and Iniectors.

    Pics:

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Car also has new injector and coil connectors that Eric put in it along with the 100k service kit.

    The UAS front bar has a slight crack. Been quoted $330 to fix.

    Price is 8.5k slightly negotiable. If interested please contact me on 0401029817. This won't be for sale for too long, if something else falls through I'm taking it off the market as I love this car :)

    Cheers,

    Trent
     
  2. scottyoz1962

    scottyoz1962 Active Member

    Sorry to hear your selling up Trent, well hopefully it all goes pear shaped and you end up keeping it :p
     
  3. kawasakirider

    kawasakirider New Member

    More than likely will end up keeping it, Steve. I doubt the skyline I want will be available for too long :p

    I have no dramas keeping it, I <3 it :D
     
  4. Carlos95

    Carlos95 New Member

    So tempting... too bad im not off dem P's
     
  5. kawasakirider

    kawasakirider New Member

    Bump.

    Front bar is getting fixed and resprayed the day after tomorrow, or I can take $330 off the price if someone wants it as is.

    Let me know!
     
  6. QLDZDR

    QLDZDR ID=David

    Hey l thought you were only selling her if you got the Skyline?

    Was it that one?
     
  7. kawasakirider

    kawasakirider New Member

    ? How could I buy the same skyline that a bloke named Jared just bought? Lol.


    I haven't purchased anything, I've got my eye on something, though.
     
  8. kawasakirider

    kawasakirider New Member

    Bump. Someone want to make me an offer on this? I am willing to entertain offers as long as they're not idiotic.

    0401029817
     
  9. kawasakirider

    kawasakirider New Member

    As I said, I welcome any mechanical test you'd like to do on the car, I have no doubt it would pass. RWC Available.
     
  10. kawasakirider

    kawasakirider New Member

    UAS Front bar currently at the panel beaters getting fixed and sprayed to match :)
     
  11. MagicMike

    MagicMike Moderator Staff Member

    Don't be gay Trent
     
  12. aurnob

    aurnob aurnob

    Mate, get some 20mm spacers for those wheels or a better offset rim, preferably black. It will look significantly better.
     
  13. kawasakirider

    kawasakirider New Member

    Already have a set of Desmond Wise Sports and just bought a set of spacers from the homo that posted above you.
     
  14. kawasakirider

    kawasakirider New Member

    $8500 Front bar is being picked up this afternoon from the panel beaters, gunna look good :D
     
    Last edited by a moderator: Apr 19, 2013
  15. kawasakirider

    kawasakirider New Member

    [​IMG]

    After seeing how sexy she is, I have decided to keep her <3
     
  16. kawasakirider

    kawasakirider New Member

    8.5k negotiable is still the price. Cheers :)
     
    Last edited by a moderator: Apr 30, 2013
  17. kawasakirider

    kawasakirider New Member

    Sold over a month ago, lol.
     
  18. SIM300

    SIM300 FAKE MODERAT0R

    Lock the thread then :rolleyes:
     
  19. kawasakirider

    kawasakirider New Member

    I didn't realise I could, thought it was a mod thing, lol.
     
Thread Status:
Not open for further replies.

Share This Page