Hi all hope some can help me i am having a bit of trouble getting the gearbox too close right up about 10mm to 15mm are the gearbox`s that hard to get back in all that has been done is a new clutch and flywheel i need some suggestions please or help from someone who have had a similar problem.:bash:
You can use longer bolts to align and help on stabbing it in.. One above the starter and the other on the drivers side. Once you have the bolts in and the transmission within the space you given turn the crankshaft with a breakover and see if it's aligned.. This should get it aligned
i just pushed to the side a bit and it went forward a bit and i put the bolts in and it pulled in the rest of the way.:zlove: