I was wondering if someone could help me out with a deliemma? i have a series 2 ptu here and the harness to adapt it. my problem lies with at some stage someone has put in a R32 NA skyline ptu in there. so i promptly removed it. however now i am worried that they may have changed the wiring configuration. so my question is, what colour wires correspond with the numbers marked on the series 2 ptu when it is wired directly to the main harness (not using the adaptor harness) so as i can make sure they are in the correct order and make corrections if necessary. hope someone can help out! Casey
Refer Tech section FSM Electrical section/ECCS wiring diagram. Pins in, colour codes= 1 L 2 L/GR 3 L/R 4 L/W 5 L/B 6 L/T Pins out= 11 B 12 R/W 13 R 14 R/B 15 R/Y 16 R/L 21 B