SARD fuel pressure regulators - in stock - for a limited time ONLY $185

Discussion in 'For Sale by Businesses' started by Fleet, Sep 3, 2007.

Thread Status:
Not open for further replies.
  1. Fleet

    Fleet Speed Racer

    Doing a back in stock special price of $185 pickup or $192 delivered for these quality SARD fuel pressure regulators.

    [​IMG]

    Fitting one of these SARD FPRs will increase your fuel delivery and pressure, resulting in better atomisation of injector spray, which leads to more powerful and efficient fuel combustion. It will also allow you to run more boost safely by increasing your fuel delivery, maintaining a safe air/fuel ratio. (for the best and safest results your boost and air/fuel should be tuned on a dyno)
     
  2. Hyper101

    Hyper101 Well-Known Member

    How to fit ?

    Im still waiting for a definitive guide on how to fit these. Theres seems to be alot of confusion/ opinions on how these stack up with the stock FPR. Placement ? etc etc
     
  3. Fleet

    Fleet Speed Racer

    to give you some idea, by just fitting a Malpassi fuel pressure regulator to our race car, running a higher fuel pressure and re-tuning, it allowed us to run another 3 pounds of boost which resulted in the 437 RWKW run.

    the Sard's are just as good if not better than the Malpassi's.

    the regulator can be mounted on one of the spare spots on the passenger strut tower or firewall.

    if needed I will do up an installation guide :)
     
  4. Hyper101

    Hyper101 Well-Known Member

    Yea what I mean is is it fitted as a replacement for the stock , inline with the stock before the fuel rail, inline with the stock after the fuel rail, etc etc. They are some of the combinations that I have heard
     
  5. Fleet

    Fleet Speed Racer

    its fitted as a replacement for the stock regulator. you do however keep the stock fuel damper (which is located on the driver side of the plenum)
     
Thread Status:
Not open for further replies.

Share This Page