richmond leader gears 4.10

hi there has anybody fitted these and ran them on the highway at 110 kms an hour if so what revs were you doing at 110

 

You have a NA right?

 

no twin turbo

 

A little lower according to my calculator, but close enough.

Wheel diam. 16 " Resulting Circumference
Tire width 225 mm 1983.601601 mm
Tire profile 50 %

Show speed at 2850 RPM

Gearing Resulting Speed
1st 3.214 25.74072836 km/h
2nd 1.925 42.9769875 km/h
3rd 1.302 63.54124496 km/h
4th 1 82.73070094 km/h
5th 0.752 110.01423 km/h
FD 4.1

 

My apologies, must be confusing you with a different member.

 

around 2500 in 5th

 

I'm on about 2700rpm

But with 315/30/18 rolling diameter

 

A simple way would be to multiply by 0.9.

3.692/4.1= 0.90048780487804878048780487804878

 

Thanks guys

 

Doesn't matter!

You'll love them!
I usually run at around 3000RPM on the highway in 5th, with no need to drop a gear to overtake.

 

Sorry in advance, old mans syndrome..... but why are these gears referred to as "Leader" gears??
Always been just "diff gears" or "ring and pinion" to me and everybody else I know.

E

 

Mark Leader of Richmond gears .

 

Ahh... OK then. There you go!

E