My new stoptecs!!

Got my new Stoptec 332mm brakes today from coz at conceptZ. These things are HUGE! Came with front and rear braided brake lines and 3 bottles of Motul brake fluid too :YD [image]http://hometown.aol.com.au/Johnschyskng/102_0263.JPG[/image]
[image]http://hometown.aol.com.au/Johnschyskng/102_0264.JPG[/image]

 

hey JT hows thing ,what did it cost you for

the whole kit here with post

 

can you just purchase the rotors? (n/m)

N/M

 

would be way to big for the stock calipers (n/m)

N/M

 

Yeah fess up. (n/m)

N/M

 

$1750US for the kit

+$330 US shipping + $220AUS duty and GST(coz special invoice):YD

 

more pics

check out the size difference[image]http://hometown.aol.com.au/Johnschyskng/102_0270.JPG[/image]
[image]http://hometown.aol.com.au/Johnschyskng/102_0268.JPG[/image]
[image]http://hometown.aol.com.au/Johnschyskng/102_0271.JPG[/image]
[image]http://hometown.aol.com.au/Johnschyskng/102_0266.JPG[/image]
[image]http://hometown.aol.com.au/Johnschyskng/102_0277.JPG[/image]

 

Check out that last pic

Big brakes, race rubber and Buddy Club P1's..... can you mean any more business? Awesome!Ben

 

They look so similar to Wilwoods!

Maybe made under license? I need a new set of Wilwood rotors, but am looking at about $500 for them. Wonder if Stoptech are the same or can be substituted but keep the Wilwood callipers?BTW the new rotor is on backwards unless you just were setting them up for the pic. Slots should scrape from inside outwards.

 

thats the left side of the car

and definately the left rotor as per the instructions and 'L' sticker on it. Dont know if it matters which way the slots go, but the vanes inside the rotor should be facing so they draw air from the inside of the rotor to the outside as it turns.

 

i like v much. :YD (n/m)

N/M

 

sweeet - already dominating your class and

now new brakes!! ^D^ can't wait to see the new times.

 

Can get those & Other brake kits at TTzed...

Brake Kit - StopTec

 

Yikes and have a look at the price diff! (n/m)

N/M

 

have at LOOK at this >>>>>>>

the price is calculated as follows;
Purchase price US$ 1945.00
Shipping US$ 300.00
x exchange rate 0.74 = AU$ 3,033.78
15% duty AU$ 455.06
10% GST AU$ 348.88
-----------------------------
TOTAL = $ 3,837.72

 

his price is still only $2981 (todays rate) (n/m)

N/M

 

How did you get that figure......>>

No matter how I wok the calculations I can't get the figure you do.

 

$3069 by my calculation, not $2981? (n/m)

N/M

 

I always thought vanes drew

air from outside to inside thus making that left rotor seem like it's on backwards. Also would have thought the intake air flow would be better over the larger surface area of the outer disc than the smaller area of the inner disc too.Would make more sense to me being that way, but if that's the way they want 'em mounted, then no point in debating the issue. They are the brake ppl after all.Those puppies should make track days much more rewarding too, well done.

 

coz looks after duty and gst so -$800 off

that figure.