Welcome Boys and Girls to my 300 build, After Finally getting some time and some inspiration from all the zed builds on here I am finally getting off my a$$ and doing something to it. I first bought the car back in late 2010, and as a young little scamper it was an impulse buy, I bought the first one that I saw and I must say that I love the thing but I have spent alot of money and its done its best to keep me broke Just like the missus haha. But now The car hasn't moved for a while because of various coolant leaks and a noisey air con compressor, and it has been sad looking at her just sitting there, I have decided to Do something about it so here is what I done so far but doesn't seem like much Changing the oil and filter every 5,000 k's Changing Plugs every 10,000 k's Have done one plenum pull only to replace a passenger turbo hose and that's it not much But now here is my list of what i want to get done 1. another plenum pull but with water bypass 2. Replace all coolant and Vac Hoses 3. Remove Engine Grenade R....? 4. 100,000 k Service 5. Clean engine bay 6. Polish various engine parts Plenum, Water Coolant pipes etc 7. New Injectors 8. Wire tuck 9. New Exhaust system 10. New turbo's or turbo Centre's 11. Maybe a New ECU or replace all looms 12. New coil packs 13. New Clutch and flywheel 14. New bushings all round 15. Coil overs 16. Big brake Upgrade 17. New Rims 18. Fix various Interior Bits and pices 19. Retrim Interior/ Gauges 20. New sound system 21. Panel beat and respray 22. New windshield and weather strip rubbers 23. New Car trimming and the list goes on and on and on So essentially I am wanting a nice looking clean zed but it is going to be a while till this happens hahaha till this happens Any way here is some pics of the car Needs new Bar Interior Needs a bit of tlc The Mascot Photo Before I started work And After Needs a Bit of a Clean Engine Grenade Removal Before Have got the bolts of just need to remove As you guys can see my car needs a bit of a clean up and its going to take a while so stay tuned... more pics to come
Any way here is some pics of the car Needs new Bar Interior Needs a bit of tlc The Mascot Photo Before I started work And After Needs a Bit of a Clean Engine Grenade Removal Before Have got the bolts of just need to remove Pics fixed - gmbrezzo
for future reference: [img ]http://farm9.staticflickr.com/8208/8156899658_95f867efd3.jpg[/img] (remove teh space on the first tag to
I havn't gotten much done today just sanded and a few bits and pieces and just seeing how everything looked Still got a bit to do but still progress is progress
IF you have an angle grinder these work very well on alloy. http://www.toolking.com.au/polishing-disc-multi-grit-pack-9-pieces/ They work like a scouring pad not a grinding stone and would allow you to polish the water pipes in about 20 mins. They can be cut down and fitted on to a dremel for getting into the hard to reach places. For a high polished finish use "Purple" alloy polish. Hope this helps.
Don't think you'll find that type of pads at bunnings or supacheap. http://www.aus300zx.com/forum/showthread.php?t=316333 This is a link to a thread i did earlier in the year when i first started doing alloy. I have since moved away from the Wet and dry paper, unless to smooth fine ripples. The main polishing in the thread is using just the gray disc 240grit