increasing boost pressure

Discussion in 'Technical' started by will300zx, Jan 6, 2013.

  1. will300zx

    will300zx Member

    Hi there just wanting to know whats the limit of boost i can run the engine is stock just been cleaned new rings/bearings/seals and i have larger ball bearing turbos/nistune/555cc injectors.
     
  2. ZYTRAM

    ZYTRAM Formerly known as martini_Z

    Are your turbos hi-flowed stockies? If so 18/19 psi, if they're aftermarket and bigger possibly more.
     
  3. will300zx

    will300zx Member

    They are not stockies there aftermarket that sort of psi wont lift the heads or break the studs it is a stock motor
     
  4. ZYTRAM

    ZYTRAM Formerly known as martini_Z

    Plenty of guys in the states pushing 500hp+ on a stock bottom end. What's your engine compression like?

    IMO depending on engine condition, you should be fine to see 300-330rwkw. Any more and you're playing with fire on a stock engine. Just make sure the tune is good!
     
  5. will300zx

    will300zx Member

    Ok thanks
     

Share This Page