VIC Huge quality parts sale! - (part 2)

Hi everyone!

Here is an updated list of what parts I still have left for sale.
There is still some fantastic stuff available!

I'm in the middle of relocating to the UK so please PM me for any info/payment details etc. Please DO NOT contact me via my mobile or old email address as listed in the original thread as these will soon no longer be in use! PM's only please!

The parts have been left with member Tektrader in Melbourne BUT Graham will only be helping me to post stuff out or arrange pickup from Berwick etc, so please DO NOT PM him directly regarding buying any of this stuff!

69. Genuine RECARO seats (reclining version as fitted OEM in some later model Zs), these are NOT copies! Immaculate condition, no rips or bolster damage! No seat rails! Pair of seats only! Asking $1100









27. Set of 4 Aragosta coilovers for Z32. Not sure of exact spring rates but was told from a reputable forum member that the Yahoo Japan ad said they are similar to the TEIN Monoflex( front 9, rear 7). These are worth well over $4K to buy new! All 4 were fully serviced (new oil, seals etc) at Aragosta before they left Japan (organized by Jesse Streeter) so basically they are now 'as new', 2 new genuine C wrench spanners are provided as well, asking $2400





Japanese website for Aragosta: http://www.tpl.co.jp/


29. 'Clearcorners' (USA) LED illuminated 2K rear centre panel. Looks clear but lights up red! Looks amazing! More info here: http://www.clearcorners.com/products/nissan/z32/r_center/
Brand new in box, never fitted, Cost $570 landed in Oz, asking even $480 considering they are VERY rare in Oz!







30. Magnaflow 14807 Mufflers x2, brand new in boxes, never fitted, asking $480 for the pair



31. Magnaflow centre muffler (with internal X pipe) basically a similar set up to the UAS centre muffler, brushed stainless finish, new in box never fitted, asking $200



10. DENSO iridium sparkplugs x6, new, asking $50



15. Ballistic 100cpsi racing metal cats from Sureflow Exhausts , 2.5" in & out, new never fitted, asking $300 for the pair



16. RHINO RAMv2 car immobilizer & alarm with additional sensors = microwave (to protect car when targa roof is off), pressure (to detect glass breaking), tilt (to detect if car is being towed) & additional screamer siren (to make it unbearable to sit inside vehicle if alarm is triggered). This unit is top of the line & even communicates with your mobile phone (sends alerts to up to 5 mobile numbers & you can also control various functions of the unit from your phone)
More info here: http://www.rhinoco.com.au/product/RAMV2
New never been fitted, asking $320



21. 350Z side indicators, new never fitted, asking $70



As seen on URHYNS' immaculate Z! :zlove:





24. Qtsarz portable GPS receiver, asking $50



32. 'Matrix Barracuda' racing helmet, size XL, only worn a few times, excellent condition, Made in Italy, Cost around $350new, asking $150





40. Spare radiator hoses, upper & lower, asking $10 each



46. Autotecnica metal gear shift knob, asking $10



47. Klippan rear seat belt set, good condition, asking $40 for pair


NB: I also have another pair of front B PILLAR seat belts if anyone is interested? Asking $60 for the pair

54. Smithy's Place polished fuel filter kit (from Cazracing), new never fitted, asking $200



55. Set of HID look headlight globes, 2 x H1 for high beams, 2 x H3C 55W for low beam, super white appearance, new never fitted, asking $40 for the set



56. LED dash kit from Brightlight Auto Parts, basically red dash & side pods with suitable colours for all other globes eg indicators, hi beam, low fuel etc, 2 plug adapters, will also include extra random LED globes suitable for pair of stop/tail lights, pair of front or rear indicators, pair of side indicators & T10s suitable for parkers/number plate etc, asking $70 for the lot





64. Set of upper door trims, 2+2, slight indent in one as shown but other than that good condition, asking $20 for pair



71. Polished CAS & mounting plate, again polishing is not car show quality but still is a good upgrade over the standard finish, asking $150 for both





73. Polished water pipes, asking $80



78a. Set of 3 heater door actuators (removed from the heater box in the pic) Asking $60
78b. Heater core still in good condition from a later model Z. Asking $60



82. Genuine Carbing front strut brace, new never fitted, asking $250





84. S1 auto climate control, missing demister button, asking $40



85. S1 auto climate control, good condition, asking $50



88. Genuine Z Centre (UK) rear fiberglass spoiler lip, this is NOT a copy! It's the type that is blended into the rear hatch to appear seamless, brand new in box, never been fitted, cost me $490 landed here in Oz, asking $350



89 & 90. ROH Modena custom 3 piece modular wheels, 19" diameter, staggered widths = 8.5" fronts, 9.5?" rears, exact offsets unknown due to a complication with the purchasing process (long story!) & as they are modular they do not stamp the offsets into the rear of the wheels - but these were custom made to suit the Z, excellent condition & 'as new' rubber all round with MAXXIS Victra MAZ1 245s front & Falken FK452 275s rear. ALL wheel nuts are security type (2 types on each wheel = 1 locking nut & 4 others). These rims & tyres cost around $4.5K to buy new, asking $3250

Rims look like this:







See other for sale thread!
(NB: wheels & tyres can be sold with my TT for an extra agreed fee!)

96. Autotecnica car cover, hail storm protection with padded top, vented sides, under car straps, has been used & has a tear at the rear bumper, but would still work well as an outdoor cover, asking $80



97. Rear wiper motor, good working condition, asking $30



Thanks for looking!

CheerZ
Russ

 

The rear spoiler , does it cover the whole rear hatch ?

Also what type 2+2 ?

 

I'll grab those spark plugs. PM sent...


AAA

 

Up date,

The rear wiper motor was chucked out. Thats not there.

Also the heater box was dissasembled and the plastic crap thrown out.

The core and tap is still here in good nick. Also the acuators are here too.

 

suspension ,are these pillow ball or rubber tops? ,

 

pillowball

 

thank you sir .there 3900$ brand new ( without post )

 

What size body are the Ballistic cats?
If they are 5" i'll take them.. PM sent

 

what size inlet/outlet does the centre muff have? 2.5" or 3"?

 

the exhaust tips (online) said 2.25", i would imagine he would have bought them both at the same time, so I would say 2.25"?

 

The OD would be 2.5 and ID 2.25 seeing they are US products

Here in Oz we say 2.5 inch system but thats 2.5 OD not ID. So they will match up fine on a 2.5 inch system.

 

gotchya, thanks.

 

No it's just a fibreglass lip that replaces the stock spoiler AND needs to be blended into the existing hatch!

It's for a 2+2

Check out the website for more info:
http://www.zcentre.co.uk/index.php?...category_id=87&option=com_virtuemart&Itemid=7

 

Really? I thought we kept the wiper motor?? .......but if Tekky says it's gone then it's gone!

 

Its probably about 200 foot under other crap at the tip by now.

 

I'm leaving Australia tomorrow morning & heading to Abu Dhabi then onto the UK! For those that have made payments recently I'll be online as soon as I can get internet access? Once I can confirm payments have cleared I'll get Tekky to post your stuff!

 

Received the air intakes. thanks

 

I'll take the LED dash kit, contemplating the front strut brace also.

 

Polished Plenum & APEXI Turbo Timer are back up for sale!


Asking $250


Asking $70

 

PM sent