NSW High Performance 2.5" Stainless Exhaust, Complete Bolt On

Discussion in 'Car Parts for Sale or Wanted' started by rob260, Aug 20, 2008.

Thread Status:
Not open for further replies.
  1. rob260

    rob260 Administrator Staff Member

    Selling my 2.5" exhaust as i will need 3" when pushing past 450rwkw.... This is a high quality, high performance setup that is ready to bolt on to a 2+0. The system is complete less dumps, but was previously bolted up behind a set of tuneagent style dump and front pipes. The exhaust was installed by Chris at Bestmufflers in Sydney. Sound is deep but not too loud and does not drone thanks to high quality mufflers.

    First up the centre section, including UAS x systems resonator, 2.5" in/out stainless steel, and the best highflow cats on the market, genuine metalcats with metal cores etc. These cats include heat shields and are stamped with EPA and CARB compiance numbers needed to be street legal (not found on magnaflow etc). Pipes connecting cats and muffler are of course stainless.

    [​IMG]

    [​IMG]

    As you can see in pics the muffler has had a bit of a knock (low car...) but this does not affect sound or performance.

    Rear mufflers are Blitz, and the pipes are 2.5" stainless mandrel bends. Mufflers were in good condition when they came off the car and have been carefully stored since. No rattle.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    So the details...

    Location: Sydney, can currently be viewed at Unique Auto Sport in Seven Hills.
    Freight: Will freight at buyers expense but would prefer pickup.
    Price: Asking price is $1200 obo. Not cheap I know but the cost of centre muffler and cats alone would add up to $1200 new, plus mufflers and labour to make up etc... This is a genuine bolt on, high quality system.
     
  2. yellow300zx

    yellow300zx Pimpin Ain't Easy

    How much was

    Installation for these on ya car? Got a 2+0 so kinda interested
     
  3. yellow300zx

    yellow300zx Pimpin Ain't Easy

  4. rob260

    rob260 Administrator Staff Member

    Install

    In response to Yellow's question

    This won't cost you a cent to install on your car as everything is flanged, hangered etc ready to literally bolt on. If sold to a forum member (advertised elsewhere) for asking price I will include a set of gaskets and new high tensile bolts so literally nothing more to spend.
     
  5. yellow300zx

    yellow300zx Pimpin Ain't Easy

    Sweet

    Altho I havent got a hoist or never have installed anything bar an aftermarket air filter and strut brace on me car so I think its outa me league but nice to know its simple
     
  6. Chrispy

    Chrispy Pretentious Upstart

    Install is easy. I put Cam's cat back on in about 15 min in the dark... Coupla axle stands and a good jack and your laughing!
     
  7. yellow300zx

    yellow300zx Pimpin Ain't Easy

    If only you lived in Sydney

    Then ya could do this for me :D
     
  8. rob260

    rob260 Administrator Staff Member

    Still for sale.

    Must be someone out there who wants a high flowing system with EPA and CARB compliant cats.
     
  9. Nigel300

    Nigel300 New Member

    Sure is a quality system

    Rob.
     
  10. Ztealth

    Ztealth Member

    You wouldn't happen to have a sound clip of it would you?
     
  11. rob260

    rob260 Administrator Staff Member

    No sorry... Wasn't planning to sell when it came off the car. Tell you what if you (or anyone) buys for asking price i guarantee sound will be as described or money back.
     
  12. OdinZ

    OdinZ New Member

    I just need a center muffler... would u separate the mid section from the rear? i'd take that mid section with the cats depending on price :D
     
  13. rob260

    rob260 Administrator Staff Member

    Thanks but i have a buyer for the lot pending payment. If anything falls through I'll let you know, although you will be second in line for centre section behind neddey.
     
  14. rob260

    rob260 Administrator Staff Member

    Sold

    Sold to mr0300
     
  15. mr0300

    mr0300 MR0300

    :)

    :zlove:
     
Thread Status:
Not open for further replies.

Share This Page