Hi guys, This post does not seem to fit any topic, I need help to identify what the designs for braided line kits for Zeds are. I would think of breather, clutch line, remote oil cooler and fuel line kits. But how are people tackling this ? I am making up the designs for my Cosworth, and I could put some ideas together for the Z, but I am figuring there are people on here that have thought about this more than I in the Z space. If that is you, please post or send me a note with your ideas and if you happen to have ideas on AN sizes, threads etc. After a long search I found a quality source of base fittings etc, but they only make sense to me with a direction for kits that would use them. I will hopefully be able to give members are great option for blinging up these bits. Gavan
I'm not a bling master by any long shot, but most of the lines I have replaced are using the worm drive clamp/anodised cap components. Once the fuel lines come from the back of the car its all nipple and rubber hose fittings. The power steer res to pump is also the same nipple and rubber hose fittings. Even transmission to cooler are connected that way. The brake lines are the only ones I see that could be done which is a good upgrade to remove the spongy rubber hose to callipers component. 90TTZ, ZOE NZX300, ProckyZ89, and Zedmd could shed more light on the components.
