Cable ties!! I don't know mate, firstly remove the front bar then. Get in and give it a go! You'll know what you need to change if it doesn't fit properly I hope you didn't go eBay spec
I have an ebay spec on my current zed. Seems fine to me, it really didn't fit behind the reo bar too well, though. All I can say is take the bar off, then cut, fit, cut, fit, cut, fit and so on. It takes a fair while. If yours is mounted like mine, you'll have metal straps that go from the FMIC up to where the main front bar mounts go. The tricky part is holding the fmic up while you put the front bar on, not that hard if you reach down to the bottom of the FMIC and hold it up while you push the bar on, hold the bar still with your leg and thread one of the bolts in
got an ebay spec FMIC to fit behind the reo bar without any cutting at all. Tight fit though, and had to rotate the AFM T-piece and apexi pod filter downwards for clearance.