Hey guys, 300zx race engine needs to go to help fund the new 370Z turbo build chasing $9000. It?s a proven combination and all freshened up ready for years of service and reliable big power performance on the street on on the track I?ve been running between 500 and 600HP for 6 years, was daily driven for quite a number of them, the most this combo has made on the dyno is 770hp at the wheels at 33psi and E85. (Garret GTX2867 turbos) I pulled the motor down for a birthday of rings and bearings earlier this year Found one bore was scored more than id like, so a new block was sourced and bored and honed to suit the combination. (ironically no cylinders were down on compression, and that cyl was one of the highest) Heads sent off to be professionally serviced at Harris Engines and all new ACL race bearings and rings installed with new Tomei MLS head gaskets Has done one dyno session and one track day since rebuild Comes complete minus turbos, injectors and coils as ill be reusing them on my VQ37. Details VG30DETT Engine freshly rebuilt earlier this year, virgin block and heads serviced by Harris Engines with all new valves Has done one dyno session and one track day since rebuild Currently in car and running.. can compression test and run up on dyno for genuine interested buyers Currently making 620hp @ 20spi This combination has made a best of 770hp @ 33psi Head Minor port and polished, (gasket matched, knife edged and deburred) 1mm oversize ferrea valves Bronze valve guides JWT HD Springs matched to cams JWT R5 Cams (272 deg duration, 10mm lift) All Lifters serviced and as new BDE billet ali bullseye adj exhaust cam gears Tomei Adj Intake cam gears (VCT Delete) Tomei MLS head gaskets ARP Head studs All new exhaust manifold studs Block Casting flash removed and deburred Bored 40 thou oversize New welsch plugs and oil gallery slugs drilled, tapped and steel tapered plugged ACL Race series pistons SCAT forged rods with ARP2000 rod bolts ACL race series bearings to rods and mains ARP main studs New Nissan OEM oil pump Accessories RobZ 63mm Billet throttle bodies BDE electric water pump BDE billet engine mounts BDE aluminium alternator mount AMS turbo manifolds match ported and HPC triple layer coated NA power steering pump Billet underdrive crank pulley Brand new alternator (well 6 months old) BDE top feed fuel injection rail with fittings and modified lower plenum Factory oil cooler bypass setup delete with full flow oil cooler adapter included New idlers, tensioner and Gates racing timing belt Can ship anywhere in the country at buyers expense