Twinz design products

Discussion in 'For Sale by Businesses' started by UNIQUE ZED, Dec 5, 2011.

Thread Status:
Not open for further replies.
  1. UNIQUE ZED

    UNIQUE ZED Zed Racing World

    Below are the latest quality products from Twin Design. Minimum required to ship is 20. The prices are pick up from UAS or we can quote on packing and freight accordng to item and locatioin.

    Rear Wing: Z32RW01 ‐ Type I (2+0 and 2+2 models) $359
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]


    Bolt‐on Diffusers: Z32RD01‐ Type I (2+0 model), Z32RD02 ‐ Type I (2+2 model) - $459
    [​IMG]
    [​IMG]
    [​IMG]


    Side Skirts: $330
    Z32SS01 ‐ Type I (2+0 model)
    [​IMG]

    Z32SS02 ‐ Type I (2+2 model)
    http://i778.photobucket.com/albums/...eater Side Skirts/TwinZ300ZX22SideSkirts7.jpg

    Z32SS03 ‐ Type II (2+0 model/Kaminari)
    [​IMG]


    Require 50% deposit and remainder when the goods arrive. This will take up to 3 months from order. Require minimum of 20 items combined, to sea freight the goods. Must be paid for in full and picked up or sent out within 2 weeks of goods arriving at UAS, or deposit is lost.
     
    Last edited by a moderator: Dec 6, 2011
  2. 300ZXC

    300ZXC #TEAMROB

    In.

    Wing.

    1. 300zxc 1 x Rear Wing: Z32RW01 - SA, 5159
    2.
    3.
    4.
    5.
    6.
    7.
    8.
    9.
    10.
    11.
    12.
    13.
    14.
    15.
    16.
    17.
    18.
    19.
    20.
     
    Last edited by a moderator: Dec 6, 2011
  3. Stef

    Stef Active Member

    Can I have some info on the rear wing please John. What is it made from? How does it mount to the hatch? Weight? Any comments on quality?
     
  4. 300ZXC

    300ZXC #TEAMROB

    Quality ought to be in keeping with the other TwinZ pieces, good stuff.
    It's made from the same flexible fiberglass they use on their other stuff. They recommend double-sided tape or sikaflex-type products.
     
  5. Raheen

    Raheen Active Member

    Fantastic JP

    The add on diffuser is better than getting the whole rear bar with diffuser IMHO as you can keep the perfectly fitting stock bar made of urathane, also must be a shit load cheaper/easier to fit and paint (if you paint it at all)

    How do the two options compare cosmetically?

    Seriously tempted, I wonder if numbers are going to be a problem, if you get close I may jump on.

    good to see you posting this in FSBB as GB by definitition (according to forum rules) involve no profit for the organiser. Really hope this goes well which it should as Twin Z stuff is made really well, pricing seems good considering where the items are coming from. :thumbup:
     
  6. NVZ32

    NVZ32 Expensive Garage Ornament

    What about the nose panels?? id be in for one if ya can get them too John?

    -Scotty
     
  7. quickzx

    quickzx Member

    What's the difference between the Type I and Type II side skirts? and are they available without the lip like in the picture for the spoiler?
     
  8. TheTwinZ (Peru)

    TheTwinZ (Peru) New Member

    - Rear wing is made of FRP which is flexible fiberglass.
    - We'll be making a thread on the easy installation of this wing as well as our bolt-on diffusers...The wing basically gets attached with Sikaflex silicon that is more than enough to keep it in place for many years of high speed pressure on the wing.
    - The wing is lighter than the OEM 90-93 TT wing.
    - Fitment is excellent, just as good as stock.

    The full bumper is lower and the diffuser is a little bit bigger compared to the bolt-on option.

    Nose panels will be offered too and the price for them is going to be US$148


    - Type I side skirts (2 seater and 4 seater) are made to fit under the OEM sides.
    - Type II side skirts (only available for 2 seater) are made to fit under the Kaminari side skirts.
     
  9. TheTwinZ (Peru)

    TheTwinZ (Peru) New Member

    One important thing to note is that we have set a minimal order quantity per product type to be able to offer the prices posted on this ad:

    - 20 bolt-on diffusers
    - 20 rear wings
    - 20 side skirts
    - 20 nose panels

    If we don't get to these numbers we'll have to reevaluate the pricing since our order volume will be smaller, making our cost per unit go higher on the shipment.

    Hope you understand that we are looking to offer the best prices possible and that implies getting a volume that helps us spread the high fixed costs of shipment.
     
  10. MagicMike

    MagicMike Moderator Staff Member

    I see there is much better pricing on another forum, and a bonus 5% off when ordering in december?

    I can't imagine that the difference in shipping something from Peru to the AUS (UAS) would be much more if any than shipping the same item from Peru to US (Z1)?
     
  11. rob260

    rob260 Administrator Staff Member

    It's worth considering that Z1 charge approximately $600USD to freight...

    I don't know what Z1 prices are but last time around it wasn't economical to buy from them, even organising container freight is expensive as Z1 are in the middle of bum****nowhere and need to ship to a depot
     
  12. THEZED

    THEZED Loose Screws Inside

    I want MORREEEEE

    My interest in getting this is subject to price remaining the same (or if it becomes cheaper :D ). Will want this before March 2012. I am in Melbourne, BUT I may drop by Sydney to do a pickup. (subject to confirmation of order and arrival dates)

    OK GETTING ONTO THE LIST.

    1. 300zxc 1 x Rear Wing: Z32RW01 SA, 5159
    2. THEZED 1x Bolt on Diffuser Z32RD01‐ Type I (2+0 model)
    1x Side Skirt Z32SS01 ‐ Type I (2+0 model) VIC, 3179
    3.
    4.
    5.
    6.
    7.
    8.
    9.
    10.
    11.
    12.
    13.
    14.
    15.
    16.
    17.
    18.
    19.
    20.
     
  13. quickzx

    quickzx Member

    Ahh i see! So is it also possible to get the side skirts without the lip on the bottom as seen in the picture for the spoiler?

    Cheers

     
  14. THEZED

    THEZED Loose Screws Inside

    The side skirts quoted in this group buy / business thing is actually about that lip on the bottom. The skirts you see in one of the pictures is from another manufacturer. What they are saying here is that this side skirt (the lip) is designed to go on a car with no side skirts but it can also go on a car with specifically Kaminari side skirt. If you have other side skirts, you may not be able to fit this product on your car (this product being the lip - side skirt).
     
  15. quickzx

    quickzx Member

    Thank you that clears it all up for me :)

     
  16. UNIQUE ZED

    UNIQUE ZED Zed Racing World

    TwinZ Center Panel. $148

    [​IMG]

    Can chose .

    Type 1

    [​IMG]

    Type 2

    [​IMG]


    TwinZ Design Type II Rear Bar $688

    [​IMG]
     
  17. ABZ300

    ABZ300 G

    John are those nose panels and diffuser fiberglass or urethane?

    Abraham
     
  18. 300ZXC

    300ZXC #TEAMROB

    All glass, Abraham.
     
  19. warren300

    warren300 SLICKTOP TT

    I like the rear wing. whats the deal on the brake light and can it be bought in Australia?
    Also if you cant get 20 people to commit to buying the rear wing are you still going to import it in limited numbers
     
  20. 300ZXC

    300ZXC #TEAMROB

    For anyone who was considering getting the wing from Z1, shipping for 1 unit is ~$385USD to SA.
     
Thread Status:
Not open for further replies.

Share This Page