Hey guys Have done a few searches, but would like personal oppinions on the following: Can you install two independant manual boost controllers running seperatly off each turbo??? And if so can you run these at different psi setting or do that have to be the same for each turbo ie 11 psi each turbo. I have boost tested my turbos, and apparently they are stock with no mods and stock ecu, but are running at 10psi each, which is above stock psi levels. With the above being the case, is running 12psi per turbo safe on stock ecu, if you have pod and exhaust upgrade? Cheers jaysen
It would be a waste and also too difficult to get both of them synchronised. You are better off putting a T piece to join waste gate lines and using one controller Oh and yes 12PSI is safe provided you have enough fuel
