Definitely interested
Plenty of people with R5 cams (myself included) experienced some minor VTC rattle still with BDE gears. Just have to live with it.
I've got PE turbos with AMS manifolds and the turbos fouled the AMS dumps on one of the studs. Cut down the stud and put a low profile nut on it,...
Things to check. Use Consult to check your temp readings as the car warms up to see if they are erratic. Just because the CTS is replaced,...
Sold to SweetZ pending payment Sold to SweetZ pending payment
Hey mate I'm interested, let me know as it develops.
Second hand, pulled from my motor in good working condition. Can optionally include a set of CZP early style rail collars with O-rings which...
Thanks guys, ended up firing the question to the manufacturer and they indicated it was a no-go. Managed to pick up a set of Racing Hart Type C...
Hi guys, I am possibly looking at a set of wheels 18x8.5 +35 F & 18x9.5 +35 R (Aodhan AH02). The vendor has raised the question of if the front...
Fuel tank size The fuel tank is indeed 72L, but I don't agree with MagicMike. The point where the fuel light comes on is 55L. This is well known.
Plugs I run ZFR7F at 19psi (~360rwkw). They are .8mm and exactly match the projected tip design of the stock PFR6B-11B but are one step colder...
Are you sure it's oil? The VTC gears have some black goop on them that melts and goes everywhere - it's not uncommon and doesn't really affect...
I'm interested too at that price? Can you let me in on your source?
Synchro parts Having replaced all the synchros in a box I would suggest you beware that there are quite a few service files on these parts. I...
I have dialled out the +4 advance on my R5 cams. According to Greg @ SZ in most cases where there are sufficient breather mods he finds backing...
Adaptronic I've been running the Adaptronic plugin for a while with good success. Installed and tuned myself - it's actually one of the easiest...
In my case the AMS dumps were touching the shaft. Had to change to low profile stud and bash it down slightly. Not ideal for a JDM car.
Pretty sure they're the right parts - purchased from Coz but I'll check to make sure. I have my Adaptronic ECU set to turn on the thermo fan on...
I'm also getting noise from my fan clutch Even at seemingly normal operating temps, fan clutch roar is noticeably audible. Never used to notice...
Is it my imagination or are you missing your radiator shroud in those pics? Hope not, as this is in my experience a necessity for correct engine...
Separate names with a comma.