Hey guys I'm having the same problem where turning right the knuckle hits the bump stop. I replaced my bushings on the rack but for some reason it...
Yeah magic mike, my mate said it was Kym that did the conversion I need. Do you have more info on how to get hold of Kym plz? I have a set...
thx heaps guys I'll keep looking
Hey guys I have the original tail lights on my 93 tt z32 and was told someone here swaps them for the new clear JDM clear 2ks. Anyone know who...
Thx heaps guys I'm going to be sorting out the fan and clutch this week cause I know that's the problem now. Thx again
Yeah thx guys I've checked thermostat and it's working but I'll have a check on the bottom hose to make sure there's no air. And yes FMIC is...
All hoses radiator fan clutch fluids the lot is only a few weeks or so old. It's just the temp here has gone up so I need another solution really
Yeah fan shrouds installed. Going on blocks Monday till I fix this. Old fan/clutch going in and better belly pan on the way soon and prob change...
Thx guys I might try putting in the old noisy fan and see if that helps. And yeah briz I have the stock shield but with the work that's been done...
Fan and clutch are all I can put it down too now as a mate thinks it's the clutch too. It had a different clutch and fan but was way too loud so...
Thx I've tried to check for air locks and seems fine I think it's my fan and viscous clutch may be too stiff and not pulling enough air. Should it...
Cooling system is new and nothing wrong with it but wondering how to fix the problem as stated above
I have a front intercooler but I seem to over heat really fast as I'm guessing air isn't getting to my radiator fast enough, I've checked leaks,...
I'm in cairns too but I use 15w-50 and the car runs like a dream but I change my oil every 5000klms as I drive it 2-3 times a week mostly.
[ATTACH] I was hoping not to pull the whole motor out but looks like I might just do it and get it out the way. Thx guys and here's a pic of the...
Hey guys my oil sump has been cracked by previous owner and they spot welded it and put a bolt in to stop further cracking, my mechanic said to...
Hey guys I'm having to fix my radius rod bushes both sides but is there a way I can do that without having to disconnect suspension brakes and all...
Separate names with a comma.