Thank you Rob and IB. That's great news :) Yes I am using the patch harness. It's super easy to use but creates a challenge when you need to make...
You are right - the DPO3 input on Haltech adaptor harness goes straight to the stock ECU connect PIN25 (wastegate control). Haltech provides base...
Thank you so much for the information mate. Bugger I can't use the factory wiring :( I bought the wiring harness adaptor when purchasing the...
Hi there, I'm in the process of wiring up a Haltech boost control device. Question I have is whether it is OK to use the factory wastegate...
looking for a dashboard in Melbourne area. Must be in good condition. Please PM
hi all, chasing an upper plenum in Melbourne area. Thanks
What Chrispy said. Should take you an hour.
I'd love to know too. Have a TT motor that needs rebuild.
Thanks Martin. I replaced all gaskets possible. The one I was referring to sits between oil pump and oil sump. I couldn't find it anywhere so...
Thanks will get an oil pressure gauge. Am I looking for unusual oil pressure throughout the rpm range (therefore confirming the pump is faulty)?...
I suspect that too. When fully warmed up I am getting: 2kg at idle 4kg above 3500rpm 7kg when cold start. I am just really curious if anyone...
Nissan OEM belt. The noise is coming from the bottom of the car. I had someone using a stethoscope and it is extremely loud when touching the oil...
Thanks guys. I reinstalled the timing belt a few times and checked the gap in the auto tensioner to ensure it's 4mm. I've driven the car for...
Hi guys, Recently changed the oil pump because it was making a rattling noise on cold start and the oil pressure was extremely low. I bought a...
Hi Martin, I visually inspected both the pump and strainer and they looked alright. I plan to disassemble the oil pump to check the clearance once...
Quick update I know it has been a while. Finally got some time off during Christmas and NY to fix this problem. Bought a brand new TT oil pump...
:agree: Lol! Thanks for the PM too brother, that's exactly how I identified it today with a stethoscope while my car is on hoist. Any idea how...
Thanks mate. Finally identified the noise is coming from the sump. I guess I will have to drop the sump at some point to find out wth is going on.
Hello guys, I have tried to search around but couldn't find anyone has a similar problem. Please see this:...
:) Cheers mate.
Separate names with a comma.