Hi all I have a White 300zx 1989 NA for sale 4 seats Australian Delivered. needs work such as Brakes and rotors (have parts just need...
Thanks guys for the info, this forum and its members never cease to amaze me with their knowledge. Thanks DinoZ for the sizes. Steve
Hi Guys After calling Sprint Auto, Super Cheap Auto (even Nissan but their parts department were closed) etc... I am having no joy in locating...
Is it possible to have a faulty PTU but it still spark? As posted previous the injector seems to be ticking but still no combustion. Time for...
OK so checked injector plug and all seemed ok, no obvious corrosion but gave them a clean anyway. Listened through screwdriver and I could hear...
Hi guys I am hoping to gain some wisdom from the forum regards this issue. The cylinder in question is drivers side middle (unsure what...
Normally the car will idle quite smoothly when running on all cylinders. When a cylinder stops working for whatever reason the car will chug a...
Spotted a red TT in TAFE carpark at Modbury. Also give a wave to a yellow one on Smart Rd Modbury near the Modbury Hospital on my way to work in...
Is the Alternator still available?
Hi all Looking at needing a plenum pull to bypass the water hoses etc.. Is there anyone on here from Adelaide who might be interested in doing...
I took it to a mechanic (not z specialist) and he put it on his hoist and pressure tested it. He could not find a leak. I took it home and looked...
Hi all My 1990 NA has started dripping coolant onto the ground when parked, it never overheats if you believe the temp gauge. I have had new...
I am considering buying a TT model (manual, 2+2). Is there a way of telling if turbo's are stuffed or nearly stuffed when you drive one. If I go...
Thanks all for replying, good to know we have some adelaide boys on here. I will check out the center bearing first, as Sanouske suggested it is...
It happens on acceleration, another weird noise is a slight "clunk" sometimes when i take my foot off the accelerator pedal. I know of Adelaide...
Hi all. This is my first post but have been here for a little while, reading all of your excellent advice. I have not seen a more friendly...
Separate names with a comma.