Selling aftermarket parts and wrecking tt engine

Complete TT auto engine wrecking name a part and reasonable price. Turbos, Auto gearbox, almost everything is still availible.

Cusco replica coolant overflow tank made of 6061 t6 light weight billet alluminium. Brand new never used with polished finished. $130ono


Greddy replica oil catch tank made of 6061 t6 light weight billet alluminium. Brand new never used with mirror polish finish. $130ono



Nismo 555cc injectors for 89-96 z32. Brand new never used price drop to $1250.


Autometer sport comp TRANS temp mechanical gauge 2 5/8inch $50

 

Pat have u got a picture of the temp gauge?

I'm tempted to buy it all of you apart from the injectors.

Ryan. :thumbsup:

 

Temp gauge

Sensor


If you look at the bezel around 270f its been a bit pushed, but apart from that its fine.


Autospeed.com retails for $201.42, its a trans temp gauge but same as a water and oil temp gauge so can basically use it for any three.

 

wrecking tt

how much for the auto trans..

 

Turbo's condition?

What condition are the snails in?

 

What is the size of the radiator overflow tank and how and where is it

mounted, what is the side tube for, can you let me know thanks MIKEA

 

Can be mounted where ever you want this is not zed specific

its basically for any car, i was going to mount either on my timming belt covers (if i ended up removing mechanical fan) or relocate battery to boot and mount it there. some other places you can mount it is around the aiv area (if you removed it). Can mount in hidden areas like stock resevoir position or under centre panel but whats the point because its inconvinient to reach and you cant see it.

The side tube will show you the water level in the resevoir.

 

Plenum etc?

You interested in selling the plenum and throttle bodies on their own?

If so then $150 for the plenum with throttle bodies and linkages still mounted.

$40 for the three cam covers

$60 for the four rocker covers

So $250 all up for the above.

Let me know

Cheers

AB

 

are you sure that first one is a radiator overflow

It looks more like a oil catch can with the sight tube on the side.

 

Yeah positive its a coolant can take more pics and post if any ones intrest

the top is a cap, if it was a oil catch it would have two nipple out lets (like the trust one pic 2 & 3), if it was a breather it would have a filter on top. This has only one nipple on the top side (not a effective location) and one drain plug bottom (better location for nipple as it is the lowest point of the resevoir so all water can be drawn back into radiator).

 

Re: Yeah positive its a coolant can take more pics and post if any ones int

how much for the transmission

 

whats your price on the compelte engine?

minus the turbos

 

Radiator overflow, can you provide me with some demensions

such as height and width also capacity , does it have any mounting brackets? thanks MIKEA

 

Sorry

Both Oil catch and Coolant has been sold.

Tranny someone is looking at and is set at $350 + delivery.

The enigne is a engine im wrecking, you cant use it any more, but lots of parts are still good.

Injectors still for sale surely someone needs them with the ammount of cars getting built now, if price is too high make a REASONABLE offer look at ttzed.com and 300zx.com.au as a guide of how much they go for.

 

Z32TT engine cover

Do you have the plastic engine cover - it covers up the accelerator cables.

The one I'm after is gold coloured, with a red stripe from front to back. With wording like "Nissan V6 3000 Twin Turbo"

My email address is neil@ntsoftware.com.au

 

ECU

do you have a stock ECU ?

bushboyz

 

sorry not availible

 

PTU available?

Just wondering if you have the PTU?

If so, is it the original or a recently replaced one? Will it work with a Manual car or doesn't it matter?

How much?

Thanks!

 

still have the overflow tank?

 

What condition are the turbos in?
IF good how much are you after for them?
Thanks