Painting Engine Bay

Discussion in 'Non Technical' started by WA300Z, Oct 6, 2008.

  1. WA300Z

    WA300Z ZD32WA

    Has anyone painted around the engine bay without removing the engine?
     
  2. ZEX300

    ZEX300 slick spec

    lol wtf? have you ever filled your fuel tank without opening the lid?
     
  3. Zander

    Zander Member

  4. ZXDEVIL

    ZXDEVIL Active Member

    I suppose you could but removing all the components and attemptng to prep things you can reach may be a bit difficult, you might as well just remove the engine anyway... it would be much easier if your respraying the same color..
     
  5. Chad_

    Chad_ Well-Known Member

    remove everything from the sides, remove everything at front (i.e rad etc), cover engine and anything else. sand, and sprey.... :rolleyes:

    although it can be done, i do remember dubs exercise. did take time, and personally id remove the engine and do it all once and for all. plus you can bypass many things in the process and clean up the bay ;) ;)...but you already know that :)
     
  6. ZX1990

    ZX1990 2+2 TT Manual

    It can be done - but much easier with the engine out - and as above, cleaning up the engine bay and bypassing things makes it look so much better :D

    [​IMG]
    [​IMG]
     
  7. WA300Z

    WA300Z ZD32WA

    Cheers, thanks for the advise
     
  8. ZXTCY

    ZXTCY Banned

    rofl :D:D:D
    You cant do it properly without taking the motor out im afraid,its a bit like sweeping the dirt under the mat :zlove:
     
  9. ugame

    ugame user #1

    you need to see dubs car in the flesh

    me and my mate were floored when he said the engine hadn't come out

    its a mint job

    just time consuming.
     
  10. LOWZX

    LOWZX Banned

    the point was to do the job properly,the engine needs to be removed
     
  11. loud'n'proud

    loud'n'proud Challenge Accepted

    DEPENDING.. which bits you need to paint.. but when you think about it.. remove everything on the sides, harness and all that... only another 2-3 hours work and the engine IS out...
     
  12. Felix

    Felix Custom User

    I was thinking when it comes time to do my car's respray I might go white, but keep the engine bay black...don't see much wrong with that. Any other colours it might be a bit odd ;-)
     
  13. ZXDEVIL

    ZXDEVIL Active Member

    There are alot of newer cars coming out with black engine bays regardless of the car's color...doesnt look that odd...
     
  14. Felix

    Felix Custom User

    yeh thats what i meant, engine bay = black = most versatile.

    but a blue car with a red bay and sills would look off..
     
  15. ZXDEVIL

    ZXDEVIL Active Member

    Oh fair enough, another good thing about black cars;):D:D
     
  16. WA300Z

    WA300Z ZD32WA

    I was thinking more along the lines of a touch up. I found these though.

    [​IMG]

    Engine bay skins, see around the sides and the rear. They go over the top and the rear one is screwed on with spaces so you can take it off to access the battery etc.
     
  17. ugame

    ugame user #1

    agreed

    but define "properly"

    anything under the engine can't be seen anyway ;)

    if its going from 1 colour to another, then sure, but if its a fresh coast of the SAME colour, id say a "proper" job, could be done with engine in.

    but yes i do agree with you

    i guess im saying, look at Dubs, and you just wouldn't know the diference ;)
     
  18. ZXDEVIL

    ZXDEVIL Active Member

    Hmmmm.... that does look interesting hides alot of the crap which alot of people relocate or remove, i like it:cool:
     
  19. Claymen

    Claymen Active Member

    Looks... tacky.
     
  20. ZXDEVIL

    ZXDEVIL Active Member

    Everything looks tacky in candy apple red;)
     

Share This Page