300zx gtr r35 holinger syvecs

Discussion in 'Member's Garage' started by badxtc, Apr 14, 2017.

  1. badxtc

    badxtc kirby's bitch

    yeah 100 % , not sure atm, to be honest , with this one its a matter of see how we go when the time comes i guess , i still have the other wheels for the mean time i would like to go with more of the undercover look tbh
     
  2. Harts

    Harts Active Member

    I remember the wheels you just built, silver already, right? Go for the pop on the Andrews V and you can chop and change. The build sort of deserves the attention anyway haha
     
    badxtc likes this.
  3. badxtc

    badxtc kirby's bitch

    yeah true , see how we go , i like both ,
     
  4. badxtc

    badxtc kirby's bitch

    300zx pic 3.jpg 300zx pic 4.jpg 300zx pic 5.jpg 300zx pic 3.jpg 300zx pic 4.jpg 300zx pic 5.jpg 300zx pic.jpg 300zx pic1.jpg 300zx pic2.jpg 305520023_603243151538839_1071192341445902129_n.jpg 305827394_1717386198626533_9072432475062145242_n.jpg 305883926_986247322773315_2501716543614768778_n.jpg
     

    Attached Files:

    Harts likes this.
  5. badxtc

    badxtc kirby's bitch

    150780457_1816118085214766_7418591858684080611_o.jpg 151086226_1816118028548105_5459595120465758636_o.jpg 151263225_1816118158548092_8001294172759804794_o.jpg 184730854_3904244186290586_8434475004665549903_n.jpg 184773359_518308175869612_2379035794967030199_n.jpg 186470789_312354277171578_7396081231312284918_n.jpg 301900969_802773364201203_3482838016184400549_n.jpg vr382.jpg vr383.jpg
     
    Harts likes this.
  6. rob260

    rob260 Administrator Staff Member

    Peter does great work hey... looks really good man
     
    badxtc likes this.
  7. badxtc

    badxtc kirby's bitch

    yeah he does , his amazing , i was lucky when he said he will do the job ,
     
  8. badxtc

    badxtc kirby's bitch

    309609036_10162082667006040_5381128503151695825_n.jpg 310044194_10162082667251040_4194159131693209648_n.jpg 309163861_1265781180841460_3903324539435696107_n (1).jpg 309465744_1053181321966429_8619118601819991742_n.jpg 309590400_414701240746391_1170446520132527138_n.jpg 310399954_10162082666771040_9212202478247645631_n.jpg 309609036_10162082667006040_5381128503151695825_n.jpg 310044194_10162082667251040_4194159131693209648_n.jpg got the engine back , but the same old problem the sump is no good again , keep having problems with it , i really need to just go dry sump and be done with it , at the moment i put the stock turbos back on it and the 1700cc injectors , just to get it all up and running again , then the 2600cc ids will go in and the new g35 900 as well , need to send the car away to fab up tubular exhaust manifolds , then the final tune ,
     
    lidz likes this.
  9. badxtc

    badxtc kirby's bitch

    turbo set up.jpg
     
    lidz likes this.
  10. badxtc

    badxtc kirby's bitch

    310821703_10162089494781040_8767490851749843022_n.jpg 310821703_10162089494781040_8767490851749843022_n.jpg flex.jpg
     
    IB likes this.
  11. badxtc

    badxtc kirby's bitch

    i cant wait to take this thing to Sydney Motorplex, roll racing, and Cootamundra etc etc , we should be there next year with 2x 1000whp supras and Aurther from tuners edge , if any of you boys want to joint us , your more then welcome some well known fast melbourne cars will be heading up as well ( i think ) i cat wait
     
  12. badxtc

    badxtc kirby's bitch

  13. badxtc

    badxtc kirby's bitch

    no real update, but we started the engine ran in the cams, and bedded in the rings, the next step in breaking in the engine is to put it through some heat cycles, only done about 3, but they really do need more, we are going to run the Bosch 74mm DBW throttle bodies as something happen to one of mine, so good time to upgrade, i painted the body at home just temp for now till i sort out the potential dry sump as the engine is just to tall an i don't like it , but see how we go ,
    at the moment its still on stock turbos, the car will be sent away in jan to get the new turbos manifolds fabbed up ready for the lagger turbos, after that point we should be able to send it, but not to the max power level of the engine, as the last part of the puzzle will be intercooler , these turbos will max out at 1800whp but not the engine there should be another 400+ in it, i will never take it there.

    317950389_711220663450681_8229706951061735409_n.jpg 317961377_482212344016407_938546927041234596_n.jpg 318211166_697998388582246_6651875668446613046_n.jpg 317950389_711220663450681_8229706951061735409_n.jpg 317961377_482212344016407_938546927041234596_n.jpg 318211166_697998388582246_6651875668446613046_n.jpg 318220439_881764752842628_3945516478152521310_n.jpg 318355690_5670705592998405_316145898172134634_n.jpg 318492818_5341943112601492_8704797369038864958_n.jpg
     
    MORBOOST, BigCol and lidz like this.
  14. MORBOOST

    MORBOOST Active Member

    I had a set of these about 20 years ago, should be split pins on the large centre nuts. They do fall off. I still remember throwing the remaining nuts a centre hubs in the bin cause I was pissed one nut fell off hahaha
     
    badxtc likes this.
  15. MORBOOST

    MORBOOST Active Member

    Andrew Hawkins is going to love this, smoke some gtr's.
     
  16. badxtc

    badxtc kirby's bitch

    yeah they car came with them on it when i first got it they were 17 x 9 front and 17 x 10 rears , but i only have 3 i did look for the 4th thru some people but could not find one at all so tbh i just chucked them out , boy do i regret that one now , but i have the 18ns now so all good, actually these are not even my favorite wheel , my fav is the weld s71 wheels lol , see how we go tho
     
  17. badxtc

    badxtc kirby's bitch

    i speak to andrew a bit he knows the car quite well, yeah we are talking about entering it in runway thrash and roll racing in sydney, should be a great time, i cant wait if im honest,
     
    MORBOOST likes this.
  18. badxtc

    badxtc kirby's bitch

    347239127_3395371014048252_7060133631987762113_n.jpg 347253835_211216438419858_5851596489710645380_n.jpg 347399985_1256975588257775_7636234226383014051_n.jpg 347411035_6575282792490432_565964241646390118_n.jpg 347434219_980603379785935_8465980500750929970_n.jpg 347239127_3395371014048252_7060133631987762113_n.jpg 347253835_211216438419858_5851596489710645380_n.jpg 347399985_1256975588257775_7636234226383014051_n.jpg 347411035_6575282792490432_565964241646390118_n.jpg 347434219_980603379785935_8465980500750929970_n.jpg 347239127_3395371014048252_7060133631987762113_n.jpg
     
    Harts, IB and lidz like this.
  19. MORBOOST

    MORBOOST Active Member

    I need to see this in person one day, just keeps getting crazier
     
    badxtc likes this.
  20. badxtc

    badxtc kirby's bitch

    hey yeah that you man i appreciate it, yeah one day when it hit the road.
    small update
    the above manifolds are not the one being made atm, i pulled the pin on that guy, took the car back and now it is back out again to another guy, hopefully he will be the last guy the car sees lol making good progress on the new manifolds, photos latter on when more is done. in the meantime, we managed to get a few electrical things out of the way, we hooked up the flat shit to be controlled by the ecu via the Hollinger strain gauge, not the syvecs. much faster this way. also got the map switch in so i can change maps on the fly, this is also really exciting to me ive been dying to set this up its a killa function , another neat little thing we have going on the 4inch exhaust cut outs, there will be one on each side, 4 inch dumps then straight out cutouts , that's about it tbh, things are happening slowly in the background , to find the right people to work on the car can be challenging,

    i also installed the quick release bonnet hingers, again a really really good upgrade if your bonnet need to come off all the time.

    i cant wait for this to be finished, i will be attending Cootamundra and syd motor plex to met up with a few or you guys.

    good things take time we shall wait and see what happen once its all done
     

Share This Page