Hi Zeders, A while back I started getting together the parts required to upgrade to Brembo calipers on my Z32TT. I have everything except the brackets for both front and rear. The Brembo Conversion Facebook page is no more. I have looked at Z1 Motorsports and found the below kit. Would some knowledgeable member please confirm this is the correct kit, and if I can purchase one in Australia? I would be much happier buying it from a member here than a retailer in the U.S. Cheers This is the 'Front' kit. I can & will also purchase the rear. https://www.z1motorsports.com/z1-pr...t-brake-rotor-conversion-brackets-p-5651.html
Looks correct to me provided you have the correct rotors. The offset on the GTR and 350Z rotors are different. I would spend a bit more and get the Brembo calipers to match your rotors as well. The little zed calipers with the big rotors look a bit silly.
Those brackets aren't used to fit brembo calipers onto a 300zx, they're to fit the larger discs from a 350z (that has brembo calipers) but still retain your stock Nissan 300zx caliper. Are you actually wanting to upgrade calipers as well or are you just after bigger rotors & use your stock calipers?
Hi lidz. Thank you for the reply. I do have 350 rotors, front and back, to upgrade the lot. I didn’t mention, sorry.
Ah fair enough, your first post mentioned brembo calipers so was getting confused there. Think you might have an issue with the rears though, I'm almost certain 350z rear rotors don't fit on z32's. Have a search but pretty sure they don't work with our handbrake. You might get lucky with a local set but otherwise I'd just buy those front adapters new via the states