I purchased these turbos from Bracket (Dean) a few months back and have since purchased new TIAL external gates and have fitted 11psi springs into each (at a cost of $500 +). Turbos appear to have had minimal use and the exhaust housing coated. I believe the stock springs are 7.5psi - I can check this. The gates fit nicely up to the dump pipes and I have all new gaskets. There maybe a few bolts missing as I haven't fitted them to the engine to find out. I have a new oil line kit from CZP to make up for this I took the heat tape off the dumps as I was going to get the pipes coated...in doing so I found no cracks or holes and the dumps will come up fine with a good clean. These turbos do not have the stock wastegates fitted or actuators, they are set up to run the included external gates. Like my other thread (engine) only reason I am selling these is because I am building and the cost of which keeps rising... Photos to come. PRICE - $2300 mobile: 0438 020 980
Yeah unfortunately not separating right now as the gates complete the set up. But in the event someone wants turbos and dumps only...
Photos now up. The gates are not bolted on in these pics...jsut resting there for the photo. I have new gaskets for the gates and they fit the dumps very well.
Shame to see you're selling mate, this would make an epic setup for a track zed or a weapon streeter!
Price Drop Everything now $1800 + postage. I wont be dropping price any lower otherwise I will just install these myself. Or will separate as follows. Will need interest for all three to sell separately. Tial gates with 11.5psi and 7.5psi springs - $420 pair posted Turbos - need internal gate setup including actuators if you want to run internal gates. $1200. Dumps - $180 pair
These are my turbos. Best you can have for untouched internals + street car setup! Good luck with sale, mate... AAA :zlove:
