Blit turbo Boost Controller SBC

Need some help resetting Boost out of adjustment re people playing with it
model Blitz Dual Solenoid SBC controllerl

 

I can email you the instruction book if you like they are a bit confusing to use at first

To set boost:

A - Turn the mode button to channel 1. " 1 " will appear.
Push the mode button " 1 " will flash on the left.

B - Push volume button until the " SET " appears on the
right. Then turn volume knob to desired ratio.

C - Repeat steps A and B to set channels 2 - 4.

To set gain:

1- Unit must be in either channel 1, 2, 3, 4, or M.
2- Press mode button and hold for three seconds. The unit will beep.
Channels 1, 2, 3, 4 and M should flash.
3- Turn the volume button to set gain.
4- Press mode button to exit.

 

That's how I adjust my Blitz EBC .When I got my Blitz controller the instruction book was in Japanese so I went on the Blitz web page and down loaded the English instruction manual.

 

Thanks fellow Zeders Question do i neeed to set each chanel independently example
1,2,3,4,

 

No need to set each one. I only have 1 and 2 set - high and lowish boost.

 

I have mine set
1 - 12psi
2 - 16psi
3 - 20psi
4 - 24psi

 

Thanks Heeps Guys