Due to the geometry of our beefy front brake calipers on the Z32, it's hard to get nice looking dishy front rims as the spoke designs usually end up foulling on the calipers, thus most Zedders have to settle with non-dishy front rim designs to clear these calipers. 90% of the time, if people with "deep-dished" optioned rear rims try to fit on the fronts, they will foul straight away. When i was looking around for my AME Shallen CX rims in Japan, i found quite a few other breeds out there aswell with plenty of front dish, but bugger all that would clear our Z32 front brake calipers. I know it's not usually a thing that people post up, or ask about (cause it's usually all about the rear dish). But for curiosity's sake, how many mm FRONT dish do people have, and what brands? (or have heard of) *pics would be nice too*
90mm dish up front. 18x10's +19 offset. Wheels are jap 2-piece Armistad Charme. Booooooarderline legal, but with 255x30x18's stretched onto them, they dont foul on the inner guards at all with lowered springs. Not on the car atm, have to get gutter rash polished out and rear guards pumped to fit them on the TT.