ProckyZ from show to GO!

Discussion in 'Member's Garage' started by ProckyZ89, May 3, 2012.

  1. ProckyZ89

    ProckyZ89 Senior Member

    See i still don't know.
    I've been crunching some numbers based on a few of my times and trying to factor a few things.
    4.10's saw 258 @410-420rwkw area
    I think the 4.10's will see 275 @500awkw(670hp) area

    The issue with the 3.69 is that once you get into 5th gear it just doesn't do anything. (410-420rwkw on 3.69 was 244.8kmph)
     
  2. Shane001

    Shane001 Well-Known Member

    What are your rear tyre sizes procky?

    270/40/18's theoretical top speed at 7000rpm with the 4.1 gears is 286kmh.

    If you're not hitting redline in 5th with the 4.1 gears you're not going to go any faster with the 3.7's.
     
  3. ProckyZ89

    ProckyZ89 Senior Member

    285/35/18 Shane and I rev to at least 73-7400
     
  4. AndyMac

    AndyMac Better than you

    If your serious about that statement, then a Holinger SG (320nm) or SG3 (650nm) box will work, just need the bellhousing fabricated to suit.

     
  5. Shane001

    Shane001 Well-Known Member

    7000rpm = 279kmh

    7400rpm = 295 :br:

    Push it to 7600 and you hit 303 :br:[TIS]
     
  6. Fists

    Fists Well-Known Member

    VQ six speed with the 3.69:1 would split the difference, another expensive addition though.

    Total ratios in top are 2.775 for a TT, 3.091 with 4.11:1 and 2.930 for six speed/3.69s.

    The six speed is close ratio so probably nice to have on circuits too.
     
  7. ProckyZ89

    ProckyZ89 Senior Member

    The issue id have with 6spd is the strength

    I feel even with 700rwhp if I even make that, that I'll max out 5th gear
     
  8. AndyMac

    AndyMac Better than you

    Need more than that to get across the line at 300Km/hr. Tristan's Capri just got over at 308km/hr and he's pushing 850hp at the wheels.

    Going to take a lot of moolah to get in that bracket with a setup that will take it and convert that HP to speed.
     
  9. ProckyZ89

    ProckyZ89 Senior Member

    Gave up on 300
    Already worked out that I'd need 800 odd rwhp to do that

    this likely is the last year I'll be doing this sort of event in the zed/competitively

    I just want to see what it can do.
    I'm hoping 270-280 @21.4-22.0
     
  10. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    that's the problem ..labour costs to set it all up ...

    hence a bolt up kit will come available from my r&r money spent ..

    .
     
  11. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    more power at 73 -7400 isn't going give you more speed ,just get you there quicker .
    I hit 260+ down the straight at eastern creek in 5th around 7500rpm (from memory) gets there very quick . (have to back off end of road)


    .
     
  12. AndyMac

    AndyMac Better than you

    Nah, not too much I don't reckon. Bit of machining, bit of welding, bit of measuring on the Holinger R32 GTR bellhousing, voila!
     
  13. Shane001

    Shane001 Well-Known Member

    Correct. I was quoting the theoretical top speed. Next you need a certain amount of torque to get you there within a set distance, in this case 1km.
     
  14. ProckyZ89

    ProckyZ89 Senior Member

    Update- box arrives

    Phase-Snow is in action from now

    Box turned up
    [​IMG]

    Inside was some goodies
    New juice hose
    [​IMG]

    Did anyone say stock throttle bodies look tiny?...
    [​IMG]
    Comparison
    [​IMG]

    Sparky sparky needed
    [​IMG]

    Some new additions to push fuel through
    [​IMG]

    A few other bits in there too and still coming ;)

    Stay tuned
     
  15. rollin

    rollin First 9

  16. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    I like the way the new version injector adapters are .

    old style are individual .



    .
     
  17. ProckyZ89

    ProckyZ89 Senior Member

    Yeah the old ones were just individual floating discs wernt they?
     
  18. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    Yes
    They cant go anywhere though .
     
  19. ProckyZ89

    ProckyZ89 Senior Member

    Last 2 parts I needed besides some assorted fuel line and connections is tracked down

    Not long now till fun begins
    30 days
     
  20. Zano

    Zano Member

Share This Page