What is the maximum boost one can get from stock turbo set up on Z32 And how does one go about setting that up ? All so a good boost controller, that's easy to use ? :rolleyes2::br::zlove: O this will be fun :rofl:
Dont quote me i think they max at 22/24psi? Wouldn't last long on that without support (injectors and a tune minimum ) most people go to 14-12 with just a boost controler
Mines stock with a boost controller and I run a max psi of about 12. If I go over 14 the car really doesn't like it so I suggest don't go over 12. Assuming your car is healthy of course. Very wise to make sure everything else is good before increasing boost. (Do a boost leak test too. You'll be surprised at how many cars out there have a boost leak)
We'll alot of people will say you should tune it if you increase it even slightly. Which yes they are correct. Running 12psi I haven't got it tuned. Anything over that like 14 then yeah you really should. I think our Stock injectors max out efficency at 16? Do you know what kind of boost controller you want?
12psi seems safe. Around 14psi they start to run a little lean. If you have Nistune or other aftermarket ECU you can tune the car to run safely at 18psi or thereabouts. [/quote]And how does one go about setting that up ? All so a good boost controller, that's easy to use ? :rolleyes2::br::zlove: O this will be fun :rofl:[/QUOTE] The easiest and cheapest way is using a manual boost controller and a boost gauge.
https://conceptzperformance.com/czp...fe-boost-12-13-psi-300zx-z32-14460_p_2633.php There is always these if you really want to do it on a budget. They'll put you at roughly 12psi. They're very easy to install and fortunately very easy to remove.