The Australian 300zx Owners Association  

Go Back   The Australian 300zx Owners Association > Technical > Z32 Technical

Z32 Technical Discuss all 300ZX (Z32) related Technical topics here - how do I diagnose, modify, repair etc

Reply
 
Thread Tools Display Modes
Old 26-02-2017, 03:44 PM   #101
IB
?????
 
IB's Avatar
 
Join Date: Jul 2000
Location: ACT
Thanks: 1
Thanked 26 Times in 23 Posts
Quote:
Originally Posted by noel0leon View Post
So while under the dash I noticed a small amount of old dried up water under the heater core.

As the dash is coming out should I replace it as a precaution?
Take out the heater core and tap and pressure test them. All you need are a couple of irrigation fittings and a garden hose to test by yourself.
__________________
Cheers
Ian
IB is offline   Reply With Quote
The Following User Says Thank You to IB For This Useful Post:
Old 27-02-2017, 06:46 AM   #102
noel0leon
Member
 
Join Date: Dec 2015
Location: Victoria
Thanks: 23
Thanked 1 Time in 1 Post
Woohoo got the clutch pedal and master cylinder in yesterday!
Amazing hiw quickly things go when you have a second pair of hands to help.
A few things did go wrong:

Got sold the wrong clutch master... It looks like a mirror to my one so it could be one for the US market? I'm not sure.
Second thing is that the clutch fork throw out bearing looks wrong as well... Will post pics this week to compare
noel0leon is offline   Reply With Quote
Old 27-02-2017, 01:29 PM   #103
Fists
Senior Member
 
Join Date: Aug 2011
Location: ACT
Thanks: 32
Thanked 158 Times in 145 Posts
Quote:
Originally Posted by noel0leon View Post
Woohoo got the clutch pedal and master cylinder in yesterday!
Amazing hiw quickly things go when you have a second pair of hands to help.
A few things did go wrong:

Got sold the wrong clutch master... It looks like a mirror to my one so it could be one for the US market? I'm not sure.
Second thing is that the clutch fork throw out bearing looks wrong as well... Will post pics this week to compare
So is now the right time to tell you that the pedal needs to be out to get the heater core out?
__________________
--Tom

Blue '91 Fairlady Z: TT, targa, 2 seater
Fists is offline   Reply With Quote
The Following User Says Thank You to Fists For This Useful Post:
Old 27-02-2017, 07:58 PM   #104
noel0leon
Member
 
Join Date: Dec 2015
Location: Victoria
Thanks: 23
Thanked 1 Time in 1 Post
I've decided to just get it driving first then deal with the heater core. We may be moving house so i need the car to be mobile first and foremost.
noel0leon is offline   Reply With Quote
Old 01-03-2017, 08:49 AM   #105
Cheddle
Member
 
Join Date: Jul 2007
Location: Tasmania
Thanks: 23
Thanked 7 Times in 6 Posts
You can definitly get the pedal in with the dash still in. just remove the panels/air tubes from around and under the steering colum.

As long as the holes you have drilled in the firewall are large enough to accommodate the clutch master then it will go in!
Cheddle is offline   Reply With Quote
The Following User Says Thank You to Cheddle For This Useful Post:
Old 01-03-2017, 03:38 PM   #106
noel0leon
Member
 
Join Date: Dec 2015
Location: Victoria
Thanks: 23
Thanked 1 Time in 1 Post
With the pedal in (I didn't paint the edges of the hole... rust risk?) I now need the following parts. Can anyone recommend places within Aus to get these.

Clutch fork boot - speaking to Nissan
Upper and centre shifter boot - speaking to Nissan
Braided single clutch line - not much luck finding this locally.
I saw this but I'm not sure if this is the single line that goes from the master to the slave and removes the second bleed point.
http://au.helperformance.com/nissan-300zx-3-0-1989-2000
noel0leon is offline   Reply With Quote
Old 02-03-2017, 07:15 AM   #107
rollin
First 9
 
rollin's Avatar
 
Join Date: Sep 2006
Location: Queensland
Thanks: 188
Thanked 214 Times in 174 Posts
for the clutch line, just email dean directly at hel performance, the website one listed is just the short one, but he does a full length one too
__________________
Euro and performance car mechanic, alloy welding from $50 - call or text - 0410492774 or briseuro@gmail.com
rollin is offline   Reply With Quote
The Following User Says Thank You to rollin For This Useful Post:
Old 02-03-2017, 09:20 AM   #108
Fists
Senior Member
 
Join Date: Aug 2011
Location: ACT
Thanks: 32
Thanked 158 Times in 145 Posts
http://www.kudosmotorsports.com/cata...993-p-952.html

http://www.rgsperformance.com/produc...d_clutch_line/

http://www.carcraze.com.au/interior/

I think the rubber shifter boot is going to be harder to find new though.
__________________
--Tom

Blue '91 Fairlady Z: TT, targa, 2 seater
Fists is offline   Reply With Quote
Old 02-03-2017, 03:45 PM   #109
noel0leon
Member
 
Join Date: Dec 2015
Location: Victoria
Thanks: 23
Thanked 1 Time in 1 Post
Thanks guys, the clutch line is sorted through HEL. These dust boots are a pain to find. I'd use the old ones but they're fairly torn up and this is the perfect time to replace them.
noel0leon is offline   Reply With Quote
Old 09-03-2017, 02:15 PM   #110
noel0leon
Member
 
Join Date: Dec 2015
Location: Victoria
Thanks: 23
Thanked 1 Time in 1 Post
Moar questions (mostly noob ones)

Pressing the clutch fork release bearing in. Can I take this to any old mechanics or do I have to go to an engineering shop? I'm keen to get someone to do this properly.

I'm looking to change the shifter bushing, but should I just get a replacement sports shifter? The search tool has told me that people here like the normal shifter and just upgrade the bushings to brass ones?
noel0leon is offline   Reply With Quote
Old 09-03-2017, 02:17 PM   #111
noel0leon
Member
 
Join Date: Dec 2015
Location: Victoria
Thanks: 23
Thanked 1 Time in 1 Post
Also, the new clutch master I bought from Bursons turned out to be a mirror image of my one, so I'm assuming it's a US one.
Going to either:
Return it or
Use all the components from it that I can into my existing Z one.
noel0leon is offline   Reply With Quote
Old 09-03-2017, 07:48 PM   #112
Fists
Senior Member
 
Join Date: Aug 2011
Location: ACT
Thanks: 32
Thanked 158 Times in 145 Posts
For the release bearing anyone that's not drunk and doesn't hate you should be able to do it, just try and pick a shop that treats their employees well enough to care.

I'd definitely say go with a stock shifter, even just get someone who's doing an order from the states to include a couple sets of the teflon bushings so you've got spares and they'll last you 30 years. Unless one of the local guys has them in stock, have a look at rgsperformance and carcraze.

Are the bolt points on the master reversed as well? Returning it would be better, shouldn't be hard for them to dig up the other part and not worth putting good seals into the other bore if it's not known to be in good condition.
__________________
--Tom

Blue '91 Fairlady Z: TT, targa, 2 seater
Fists is offline   Reply With Quote
The Following User Says Thank You to Fists For This Useful Post:
Old 09-03-2017, 08:14 PM   #113
noel0leon
Member
 
Join Date: Dec 2015
Location: Victoria
Thanks: 23
Thanked 1 Time in 1 Post
Sweet, I like the stock shifter anyways.

Yeah the bolt holes are reversed on the master - going back to Bursons tomorrow. Although I don't think they'll be able to get them by Sat.
noel0leon is offline   Reply With Quote
Old 14-03-2017, 08:43 AM   #114
noel0leon
Member
 
Join Date: Dec 2015
Location: Victoria
Thanks: 23
Thanked 1 Time in 1 Post
So I replaced the heater hoses over the weekend and pressure tested the heater core. Thankfully it didn't leak into the cabin. Phew.

Hoses are in gearbox is ready to go into the car.

Question now is wiring - I've been reading up about how people modify the wiring of the auto. But I've got a donor car with a manual loom. Does anyone know if I can take bits from the manual loom and just plug them into the auto?

If so which bits?
noel0leon is offline   Reply With Quote
Old 21-03-2017, 09:10 AM   #115
noel0leon
Member
 
Join Date: Dec 2015
Location: Victoria
Thanks: 23
Thanked 1 Time in 1 Post
Anyone know a mobile mechanic in the Western Suburbs of Melbourne? I'm at the point now where I need some help.
noel0leon is offline   Reply With Quote
Old 21-03-2017, 05:19 PM   #116
Fists
Senior Member
 
Join Date: Aug 2011
Location: ACT
Thanks: 32
Thanked 158 Times in 145 Posts
For the rubber boots there's a guy called Josh Baldwin selling the pair on facebook if you're on fb and in the z groups.
__________________
--Tom

Blue '91 Fairlady Z: TT, targa, 2 seater
Fists is offline   Reply With Quote
The Following User Says Thank You to Fists For This Useful Post:
Old 01-04-2017, 11:44 PM   #117
noel0leon
Member
 
Join Date: Dec 2015
Location: Victoria
Thanks: 23
Thanked 1 Time in 1 Post
FInally onto the electronics now! The guy who sold me my donor car was seriously rookie. So far almost every major bolt that I've taken apart in the drive train has been incorrect. Now my tramission mounting bolts are wrong.

But it's in and I've got a couple of questions before I start on the electrics:
1. I've upgraded to a one piece drve shaft - do I need to install the middle ring section that was in the standard drive shaft? It doesn't look like I need it.

2. I'm assuming th driveshaft spline doesn't need to be lubed before install? All that gearbox fluid that came out would take care of that?

3. The instructions for wiring I've found are a little vague. I've gotten the cables for the backup lamp and neutral switch from the donor car but I don't know where they go into the auto loom. Help?

Last edited by noel0leon; 01-04-2017 at 11:47 PM.. Reason: additional questions
noel0leon is offline   Reply With Quote
Old 02-04-2017, 03:03 PM   #118
Fists
Senior Member
 
Join Date: Aug 2011
Location: ACT
Thanks: 32
Thanked 158 Times in 145 Posts
1: Correct, no need for the centre bearing support with a 1-piece.

2: Probably not necessary although wetting down the seal and OD of the shaft where it inserts will help make sure there's no abrasion from installation. Just use oil from the box or vasoline or some bearing grease should be fine too.

3: I'll leave that to someone who's done it
__________________
--Tom

Blue '91 Fairlady Z: TT, targa, 2 seater
Fists is offline   Reply With Quote
The Following User Says Thank You to Fists For This Useful Post:
Old 06-04-2017, 09:50 PM   #119
noel0leon
Member
 
Join Date: Dec 2015
Location: Victoria
Thanks: 23
Thanked 1 Time in 1 Post
Found out where they need to go into the loom. Now a new problem.

The neutral position switch and the backup lamp switch both broke off at the transmission. So unless I can unbotl and replace them, I'll have to solder the wires to the cables.

I tried unbolting those mounts but they're not budging.

Going to have to solder them up.

At least the gearbox went in no worries.
noel0leon is offline   Reply With Quote
Old 24-04-2017, 10:38 AM   #120
noel0leon
Member
 
Join Date: Dec 2015
Location: Victoria
Thanks: 23
Thanked 1 Time in 1 Post
I literally haven't done anything on this for the past 3 weeks. Holiday's, family visits, work.

However this has happened on the weekend:

Realised I need to replace the speed sensor and reverse sensor on the gearbox as my attempts at soldering it were pretty fail. Sigh. I hope they still make those.

Also, I've 'misplaced' my clutch slave cylinder - this what I get for taking so long to do this
So I'm going to have to methodically dig through my ultra messy garage to find a teeny tiny slave cylinder.
noel0leon is offline   Reply With Quote
Reply

Lower Navigation
Go Back   The Australian 300zx Owners Association > Technical > Z32 Technical

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time now is 12:32 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.