The Australian 300zx Owners Association  

Go Back   The Australian 300zx Owners Association > Buy and Sell > Zeds For Sale

Zeds For Sale Sell your 300ZX here

Closed Thread
 
Thread Tools Display Modes
Old 25-03-2017, 04:28 PM   #1
BT300zx
Junior Member
 
Join Date: Mar 2006
Location: Victoria
Thanks: 0
Thanked 0 Times in 0 Posts
1990 Red N/A Slicktop

Here is a 1990 Fairlady Z Slicktop , Naturally Aspirated Manual.
Vin# 6T91MPV97Y2BSH005
Contact Brent on 0408979740
This car was purchased for a client's son who has reneged so its now up for sale. The car was initially purchased with the intention of restoring but after the completing the mechanicals and interior, the customer has changed their mind.
Originally, a P-plater approved sports performance vehicle was the goal. Being a slicktop, this is the lightest and stiffest chassis that were limited production units made which makes it the rarer Z32-This was the car you purchased in japan to race in production classes where luxury embellishments were second to performance and still looks stunning 25 years on.
Starting with the motor, the engine has been completely resealed with genuine nissan head gaskets and new headbolts. Heads were rebuilt with Turbo Valve Springs but otherwise stock equipment. The block has 138xxxkms and passed inspection hence just a head and seal job to refresh it. Brand new waterpump, thermostat, spark plugs, oil & fuel filters, engine mounts, timing belt and pulley kit, and a paint job to to make it look swish!
Refurbished PTU (spark igniter), alternator, statermotor, A/C compressor. The usual under plenum deletes have been done. EGR system removed & any additional vaccum & coolant lines have all been bypassed and/or replaced. Oil and coolant systems have been flushed and refilled. Catback exhaust w/ Jasma Rear Mufflers (sounds like a 90's japanese v6 should).
Engine is mated to a lightened flywheel with Exedy H/duty clutch kit w/ new thrust bearing, hardened fork pivot bolt. Rebuilt shifter w/ shift bushes. Gearbox is smooth and solid when shifting gears, no noise or crunch engaging any gear.
New tailshaft centre bearing leading to the rear Nismo 1.5 way mechanical diff. Car is great to drive and fun to sqeeze out of a corner. Very responsive and smooth.
Tein superstreet coilovers all round w/ height and damper adjustment. Car has 18x8 F / 18x9 R Stern Wheels w/ kuhmo ecsta rear tyres (virtually new). Front slotted rotors. The interior has been put back to stock (had gauges and gadgets all over). Relatively clean with usual wear and tear for its age. Couple scratches amd marks in the cockpit, little bit worse in the boot. Pair of Drift CarbonFibre backed racing seats on modified standard sliding rails. Car was broken into and trashed so external key barrels are damaged and need replacing. Car has Alpine Type S Component Speakers in front and will be fitted with Alpine Radio/CD/USB media unit (not pictured but currently awaiting install).
The only thing that lets this car down is the exterior, the car has had a respray in its life which is evident by the color fading to different tones. Overall the car is pretty straight both panelwise and underneath. Couple of dints and dengs but nothing major for its age. Worst panel is the tailgate, the original spoiler has started rusting were the bolt holes are. At purchasers request, a replacment hatch can be supplied which is rust free, just finsihed in black. Any other original componentry may be supplied with sale (i have a few spares of everything). It was due to get a full respray but unfortunately never made the next stage of restoration.
Apart from body the other "needs attentiom" items are the heater core was bypassed and i can only assume its compromised (needing replacement) and an A/C line missing in the front of vehicle-So no heating or cooling.
The car was somebody's pride and joy at some point in its life but has been left outside to the ravages of the environment for too long before i found it. This car has been mechanically brought up to spec and just needs a final few items & work to bring it back to 100%. RWC supplied in the asking price. I build, restore, wreck & repair japanese cars in my spare time. I appreciate the age and faults with this particular vehicle at this stage of build and an open to negotiations. Car is at a workshop and can be inspected at request. Thanks for viewing
Attached Images
File Type: jpg 20170309_154851.jpg (97.1 KB, 249 views)
File Type: jpg 20170309_151014.jpg (95.8 KB, 248 views)
File Type: jpg 20170309_151035.jpg (96.2 KB, 243 views)
File Type: jpg 20170309_151023.jpg (95.5 KB, 243 views)
File Type: jpg 20170309_154929.jpg (95.1 KB, 242 views)
File Type: jpg 20170309_154923.jpg (95.3 KB, 241 views)
File Type: jpg 20170309_154911.jpg (97.8 KB, 244 views)
File Type: jpg 20170309_155009.jpg (98.3 KB, 240 views)
File Type: jpg 20170309_155015.jpg (96.3 KB, 239 views)
File Type: jpg 20170309_154906.jpg (97.9 KB, 235 views)
BT300zx is offline  
Old 25-03-2017, 05:34 PM   #2
scottyoz1962
Senior Member
 
scottyoz1962's Avatar
 
Join Date: Jun 2011
Location: Queensland
Thanks: 48
Thanked 76 Times in 61 Posts
You will need to put a price on it or the mods can and will remove the ad if you don't.
scottyoz1962 is offline  
Old 25-03-2017, 05:37 PM   #3
BT300zx
Junior Member
 
Join Date: Mar 2006
Location: Victoria
Thanks: 0
Thanked 0 Times in 0 Posts
Price $7000 with RWC. Open to Negotiations.
BT300zx is offline  
Old 30-03-2017, 10:36 AM   #4
QLDZDR
ID=David
 
QLDZDR's Avatar
 
Join Date: Aug 2013
Location: Queensland
Thanks: 73
Thanked 70 Times in 63 Posts
Hope you got a non refundable deposit.

are those the staggered 17" Stern 3 piece wheels.
8.5" and 9.5" that were a really expensive dealer option, back in the day?

Look like mine
__________________
QLDZDR
Quote:
Originally Posted by ryZan...........Originally Posted by shineyZx
Drive it 'till it dies.......................best to just drive till it dies
QLDZDR is offline  
Old 31-03-2017, 09:32 AM   #5
BT300zx
Junior Member
 
Join Date: Mar 2006
Location: Victoria
Thanks: 0
Thanked 0 Times in 0 Posts
Thanks for that. The wheels are actually 235/45R17 Front and 255/40R17 Rear. So NOT 18in like suggested I the original add.
BT300zx is offline  
Old 10-04-2017, 01:23 PM   #6
BT300zx
Junior Member
 
Join Date: Mar 2006
Location: Victoria
Thanks: 0
Thanked 0 Times in 0 Posts
Price Drop $5500 as is, No Rwc
BT300zx is offline  
Old 14-04-2017, 02:58 PM   #7
East Coast Z
Senior Member
 
East Coast Z's Avatar
 
Join Date: Jul 2006
Location: New South Wales
Thanks: 11
Thanked 195 Times in 169 Posts
In your opening post you stated.

"Heads were rebuilt with Turbo Valve Springs but otherwise stock equipment."

Unfortunately, there aren't any Turbo Valve Springs.

According to Nissan FAST
Part No. 13203-58S00 valve springs are used on both the intake & exhaust valves in NA & TT engines.
East Coast Z is offline  
Old 16-04-2017, 09:16 AM   #8
BT300zx
Junior Member
 
Join Date: Mar 2006
Location: Victoria
Thanks: 0
Thanked 0 Times in 0 Posts
Then i guess the people at the engine shop probably put heavier springs intended for the turbo motors when hi revs and boost were the goal of the engine build before repurposing for this vehicle.
BT300zx is offline  
Old 21-04-2017, 03:31 PM   #9
BT300zx
Junior Member
 
Join Date: Mar 2006
Location: Victoria
Thanks: 0
Thanked 0 Times in 0 Posts
Vehicle no longer available. Sold!
BT300zx is offline  
Closed Thread

Lower Navigation
Go Back   The Australian 300zx Owners Association > Buy and Sell > Zeds For Sale

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time now is 08:14 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.